Running a setup of Flow Series LEDs? Well you need some way to control them! The BlueGhozt V2 is a feature-packed addressable LED controller, perfect for automotive use
BlueGhozt Lite 2.0 Features:
- Six 12v inputs, for left turn, right turn, park, brake, reverse, and show mode trigger
- Controls two chains of addressable LEDs up to 350 RGB/260 RGBW each
- Fully configurable through Bluetooth with the iOS/Android app
- New features delivered over the air through app updates
- Multiple sequential turn signal animations
- F1-style braking
- Parking/running lights
- Showmodes triggered via Bluetooth
- One module controls two turn signals
- Unlimited fully customizable showmodes can be saved with the app
- Adjustable turn signal timing to car’s flasher unit
- Very low power drain while in operation, sleep mode when idle
- Includes a protective plastic housing
Experience with retrofitting, soldering, and working with LEDs/resistors recommended. Headlight/taillight in most cases must be opened to gain direct access to install LEDs. LEDs, headlights, or taillights are all sold separately.
MAKE CAREFUL NOTE - Are you using 5V or 12V addressable LEDs? Power injection must provide the correct voltage to the correct parts or your LEDs will be destroyed! Controller is not pre-assembled, DIY wiring for signals and LED outputs will be necessary.
What's Included:
1x BlueGhozt V2 Flow Series Remote w/ Case
1x 10 Amp 12v to 5v Power Inverter
2x JST Pigtails
2x Capacitor Links (install before the first LED in the chain to ensure smooth and spike-free power delivery, 12V or 5V compatible)
BlueGhozt Lite 2.0 Features:
- Six 12v inputs, for left turn, right turn, park, brake, reverse, and show mode trigger
- Controls two chains of addressable LEDs up to 350 RGB/260 RGBW each
- Fully configurable through Bluetooth with the iOS/Android app
- New features delivered over the air through app updates
- Multiple sequential turn signal animations
- F1-style braking
- Parking/running lights
- Showmodes triggered via Bluetooth
- One module controls two turn signals
- Unlimited fully customizable showmodes can be saved with the app
- Adjustable turn signal timing to car’s flasher unit
- Very low power drain while in operation, sleep mode when idle
- Includes a protective plastic housing
Experience with retrofitting, soldering, and working with LEDs/resistors recommended. Headlight/taillight in most cases must be opened to gain direct access to install LEDs. LEDs, headlights, or taillights are all sold separately.
MAKE CAREFUL NOTE - Are you using 5V or 12V addressable LEDs? Power injection must provide the correct voltage to the correct parts or your LEDs will be destroyed! Controller is not pre-assembled, DIY wiring for signals and LED outputs will be necessary.
What's Included:
1x BlueGhozt V2 Flow Series Remote w/ Case
1x 10 Amp 12v to 5v Power Inverter
2x JST Pigtails
2x Capacitor Links (install before the first LED in the chain to ensure smooth and spike-free power delivery, 12V or 5V compatible)
