Running a setup of Flow Series LEDs? Well you need some way to control them! Select between the SP series remote and the Blueghozt V2, see below for details:
BlueGhozt Lite 2.0 Features:
- Six 12v inputs, for left turn, right turn, park, brake, reverse, and show mode trigger
- Controls two chains of addressable LEDs up to 350 each! (260 for RGBW)
- Fully configurable through Bluetooth with the iOS/Android app!
- New features delivered over the air through app updates!
- Multiple sequential turn signal animations
- F1-style braking
- Parking/running lights
- Showmodes triggered via Bluetooth
- One module controls two turn signals!
- Unlimited fully customizable showmodes can be saved with the app
- Adjustable turn signal timing to car’s flasher unit
- Very low power drain while in operation, sleep mode when idle
Includes a protective plastic housing!
Minimal experience with retrofitting, soldering, and working with LEDs/resistors recommended. Headlight/taillight in most cases must be opened to gain direct access to install LEDs. LEDs, headlights, or taillights are all sold separately.
MAKE CAREFUL NOTE - Are you using 5V or 12V addressable LEDs? Power injection must provide the correct voltage to the correct parts or your LEDs will be destroyed! Controller is not pre-assembled, wiring for signals and LED outputs will be necessary.
If the Blueghozt is too expensive or overkill for your build, check out our more cut-down preassembled SP option. This driver controller combo helps to close the gap giving you basic driving functions you need - white running light mode, and sequential amber turn signal mode, along with the show modes you want. 5V only!
What's Included:
1x Bluetooth Flow Series Remote
1x 12v to 5v Power Inverter
2x Cap Links (use before any LEDs in the system to ensure smooth and spike-free power delivery)
BlueGhozt Lite 2.0 Features:
- Six 12v inputs, for left turn, right turn, park, brake, reverse, and show mode trigger
- Controls two chains of addressable LEDs up to 350 each! (260 for RGBW)
- Fully configurable through Bluetooth with the iOS/Android app!
- New features delivered over the air through app updates!
- Multiple sequential turn signal animations
- F1-style braking
- Parking/running lights
- Showmodes triggered via Bluetooth
- One module controls two turn signals!
- Unlimited fully customizable showmodes can be saved with the app
- Adjustable turn signal timing to car’s flasher unit
- Very low power drain while in operation, sleep mode when idle
Includes a protective plastic housing!
Minimal experience with retrofitting, soldering, and working with LEDs/resistors recommended. Headlight/taillight in most cases must be opened to gain direct access to install LEDs. LEDs, headlights, or taillights are all sold separately.
MAKE CAREFUL NOTE - Are you using 5V or 12V addressable LEDs? Power injection must provide the correct voltage to the correct parts or your LEDs will be destroyed! Controller is not pre-assembled, wiring for signals and LED outputs will be necessary.
If the Blueghozt is too expensive or overkill for your build, check out our more cut-down preassembled SP option. This driver controller combo helps to close the gap giving you basic driving functions you need - white running light mode, and sequential amber turn signal mode, along with the show modes you want. 5V only!
What's Included:
1x Bluetooth Flow Series Remote
1x 12v to 5v Power Inverter
2x Cap Links (use before any LEDs in the system to ensure smooth and spike-free power delivery)
