VLR-6 Turn Signal Resistors

SKU:
$26.00
$26.00
Unavailable
per item

Swapping your turn signal bulbs for LED from halogen, or removing them entirely in favor of LED strips or halos, will often leave your turn signal flash circuit repeating too fast. LEDs draw far less load than halogen bulbs, tricking the system into thinking the bulbs are burned out. When swapping flasher relays is not an option (an unfortunate reality on almost all modern vehicles), you need resistors to rebalance the system and restore a normal flash speed.

The VLEDs VLR load resistors accomplish the same task as a common gold resistor, but are much easier to install, and run 50% cooler (250°F MAX). They are constructed using a wire wound resistor potted inside of a black anodized aluminum heat sink; these are the most weatherproof and thermally safe resistors on the market. VLR resistors use high temp silicone wiring with a waterproof 2-pin T tap for easy connections. The integrated mounting points or the included VLR high temp tape can be used to mount the resistor body to a metal surface under the hood. Please note: VLR resistors must be mounted out of harms way and should not touch any plastic or other wiring.

TECHNICAL SPECS
​Current Draw: 1.9A @ 12V | 2.25A @ 14.4V
Load (Per Resistor): 1 standard filament bulb (equivalent wattage: 25W)
​Included: 1 pair (2x) resistors