VLR-3 Turn Signal Resistors
Swapping your turn signal bulbs for LED from halogen, or removing them entirely in favor of LED strips or halos, will often leave your turn signal flash circuit repeating too fast. LEDs draw far less load than halogen bulbs, tricking the system into thinking the bulbs are burned out. When swapping flasher relays is not an option (an unfortunate reality on almost all modern vehicles), you need resistors to rebalance the system and restore a normal flash speed.
TECHNICAL SPECSCurrent Draw: 3.8A @ 12V | 4.5A @ 14.4V
Load = 2 standard filament bulbs (equivalent wattage: 50W)
Included: 1 pair (2x) resistors